Connecting Usb Adapter To Pc; Connecting Power Supply To Charger Base; Docking And Charging Headset - Plantronics Savi 430 Quick Start Manual

USB Adapter (D100)
Indicator Light
Charging Charger Base
Indicator Light
Volume Up Button
Volume Down Button
(also controls mute)
Headset with Pre-Installed Eartip
4
Subscription Button
Base Power Supply
USB Charging Cable
Call Control Button
Indicator Light
Microphone
Extra Eartips

1 Connecting USB Adapter to PC

1-1. Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will
be solid red to indicate the USB adapter is powered on and will turn solid green when it finds
the headset.
1-2. The USB adapter can be folded as shown.
NOTE The headset may need to be charged before the USB adapter can find it.

2 Connecting Power Supply to Charger Base

2-1. Connect the base power supply into the power jack on the charger base.
2-2. Connect the power supply to the outlet. The charging indicator light will be solid green.

3 Docking and Charging Headset

3-1. Gently push the headset into the charge cradle.
The charging indicator light on the charger base will
flash green to indicate that the headset battery is charging.
3-2. Charge for at least 20 minutes prior to the
first use. A full charge takes 3 hours.
NOTE The USB charging cable can also be used to charge the headset.
NOTE The product has a non-replaceable battery. Contact Plantronics for replacement
information.
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
5