Vivotek FD816C-HF2 User Manual page 210

VIVOTEK
localstorage_modnum
localstorage_modversion
localstorage_stormgrversi
on
localstorage_supportedge
localstorage_slconnum
remotecamctrl_master
remotecamctrl_slave
fisheyelocaldewarp_c<0~
(capability_nvideoin)-1>
<product dependent>
Group: capability_daynight_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER
support
builtinir
externalir
smartir
210 - User's Manual
0, 0/7
<positive integer>
<string> 0/7
<string> 0/7
0, 0/7
<positive integer>
0,<positive integer> 0/7
0, <positive 0/7
integer>
<boolean> 0/7
0, <positive 0/7
integer>
VALUE SECURITY
(get/set)
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
The maximum MOD connection numbers.
Indicate MOD daemon version
Indicate storage manager daemon version
An 32-bit integer, which indicates the
supportive application of edge storage.
If the value of this parameter is larger than 0,
it means that the camera supports edge
recording function.
bit 0 : It supports to record directly to an
on-board SD-Card.
bit 1~: Currently, they are reserved bit, and
the default value is 0.
The maximum seamless connection number.
Indicate whether to support remote auxiliary
camera (master side), this value means
supporting max number of auxiliary camera.
Indicate whether to support remote camera
control (slave side).
Indicate the supported streams of local
dewarp. One bit represents one supported
stream. The LSB indicates stream 0.
Ex: "3" means stream 0 and stream 1 support
local dewarp.
* Only available when "capability_fisheye" > 0
DESCRIPTION
Indicate whether the camera supports day/night
mode switch
Indicate whether to support built-in IR led.
Indicate whether to support external IR led.
Indicate whether to support smart IR.