Network Setting (Windows) - Canon ipf6350 User Manual

Configuring the Printer's NetWare Network Settings
Follow the steps below to configure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item
Frame Type
NCP Burst Mode
Print Application
Packet Signature
Bindery File Server Name
PServer
Print Server
Name
Print Server
Password
Polling Interval
RPrinter Print Server
Name
Printer Number
iPF6350
Details
Specify the type of frame to use in NetWare.
Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue server
mode. Normally, leave the setting On.
Choose the print service.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
Select If Requested by Server to use packet signature.
Specify the name of a file server that has a NetWare print server.
(0–47 characters)
Specify the name of a NetWare print server.
(0–47 characters)
Set a password for the print server.
(0–20 characters)
Specify the interval to confirm jobs.
(1–15 seconds)
Specify the name of a NetWare print server.
(0–47 characters)
Specify the number of the printer connected to the NetWare print
server.
(0–15)
Configuring the Printer's NetWare Network Settings
Network Setting >

Network Setting (Windows)

>
Default
Setting
Disabled
On
NDS PSer-
10
ver
If Reques-
ted by
Server
—
—
945
—
5
—
0