Canon ipf6350 User Manual page 919

Inter- TCP/
face IP
Setup
Net-
Ware
AppleTalk
Ether-
net
Driver
Interface Print
Return Defaults
System Sleep Timer
Setup
Buzzer
Contrast Adj.
Date &
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
iPF6350
Downloaded from ManualsPrinter.com Manuals
Setting Item
IPv6 DNS
DNS Domain
Set-
Name
tings
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Date
Time
Printer Parts
Description, Instructions
Specify the DNS domain name.
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the
default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound once for warn-
ings and three times for errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date set-
ting is specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Specify printing behavior if the type and size of pa-
per specified in the printer menu does not match the
type and size in the printer driver.
> Control Panel >
9
901
Menu Settings