Panasonic HC-W580 Operating Instructions Manual page 148

What you can do with [Baby Monitor]
∫ Checking on the baby in your house
You can check the image of the baby being monitored on your smartphone.
≥ Images of baby-monitoring cannot be recorded.
≥ It cannot be confirmed with multiple smartphones simultaneously.
∫ Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
≥ A voice message of up to 1 minute can be sent.
≥ Open the LCD monitor of this unit when using the Voice message function.
∫ Sending notifications to your smartphone
This unit sends a notification to the smartphone in the following situations:
≥ When baby monitoring starts
≥ When a sound is detected
∫ Sound detection
When this unit detects a sound, it can automatically send a notification to the connected
smartphone.
≥ This function can be used only if this unit is connected to the Internet via the wireless access
point when [Baby Monitor] is used.
≥ Depending on [Sound Detection Sensitivity] setting and recording conditions, sounds may not be
detected. Test the sound detection function in advance to check if sounds can be detected and
notified.
Changing [Baby Monitor] settings
Touch [Setup] on the screen of this unit, and select the item you want to set.
∫ [Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
[ON]/[OFF]
∫ [Notification Test]
This tests if a notification can be sent to the smartphone when a sound is detected.
∫ [Remote Voice Level]
This sets the voice message volume.
(Volume high)/
∫ [Sound Detection Sensitivity]
This sets the sound detection sensitivity.
[High]/[Low]
(Volume low)
- 148 -