LG 42PA4500 Owner's Manual page 64

64
CUSTOMIZING SETTINGS
Advanced Image Options
Setting
Dynamic Contrast
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Noise Reduction Reduces screen noise without compromising video quality.
Gamma You can adjust brightness of dark areas and middle gray level area of the picture.
Black Level
Sets black level of the screen to proper level.
Film Mode Makes video clips recorded in film look more natural by eliminating judder effect.
Color Gamut Advanced Control
Maximizes the utilization of color to increase color quality.
Expert Control
Displays color domain of the signal.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC
This will produce richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Expert Pattern This is the pattern used for expert adjustment.
This function is enabled in "Picture mode - Cinema, Expert" when you watch DTV.
Color Filter This filters specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Color Temperature Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select Cool, Medium, Warm
b. Method : 2 Points
y y
y y
y y
Color Management As the tool used by the experts to make adjustments by using test patterns, this does not
System affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/Blue/
Cyan/Magenta/Yellow).
Color difference may not be distinctive even when you make the adjustments for general
video.
Adjusts Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan/Magenta Luminance: The adjustment range is -30 - +30.
This feature is disabled in RGB-PC and HDMI-PC mode.
» Low: Make the dark and middle gray level areas brighter.
y
»
Medium: Express the original picture level.
y
» High: Make the dark and middle gray level areas darker.
y
» Low: The reflection of the screen gets darker.
y
» High: The reflection of the screen gets brighter.
y
» Standard: Displays standard set of colors.
y
» Wide: Increase number of colors used.
y
» Standard: Displays standard set of colors.
y
»
Wide: Increase number of colors used.
y
Points: Low, High
Pattern: Inner, Outer
Red/Green/Blue: The adjustment range is
-50 - +50
Description
c. Method : 20 Point IRE
Pattern: Inner, Outer
y y
IRE (Institute of Radio Engineers) is the
y y
unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100
Plasma TV. You can adjust Red, Green or
Blue according to each setting.
Red/Green/Blue: The adjustment range is
y y
-50 - +50.
d. Apply to all inputs