Part Names Of The Projector; Attaching The Lens Cap; Carrying The Projector - NEC MT1065 User Manual

Part Names of the Projector

Remote Sensor (See page E-11)
Built-in Security Slot ( )*
Ventilation (inlet)
Carrying Handle
Adjustable Tilt Foot Lever
(See page E-19)
* This security slot supports the MicroSaver
trademarked and owned by Kensington Microware Inc.
Filter Cover (inlet)
Remote Sensor
(See page E-11)
Stereo Speaker (5W)

Attaching the lens cap

To attach the lens cap to the bottom with the supplied string and rivet:
1. Thread the string through the
hole on the lens cap and then
tie a knot in the string.
2. Use the rivet to attach the
string to the bottom of the
projector.
Controls (See page E-7)
Adjustable Tilt Foot (See page E-19)
®
Security System. MicroSaver
Lamp Cover (See page E-53)
DVI IN
G/Y
AU DIO
IN
RG B2
RG B1 IN
L/M ON
O IN
S-V IDE
Main Power Switch
When you plug the supplied power cable into
an active wall outlet and turn on the Main
Power switch, the POWER indicator turns
orange and the projector is in standby mode.
(See page E-18)
Ventilation (outlet)
Heated air is exhausted from here
®
is a registered trademark of Kensington Microware Inc. The logo is
PC Card Slot 1
PC Card Slot 2
1
2
REM OTE
NTR OL
PC CO
B ) R
USE /HU
USB ( MO L/M ON O
AU DIO
AU DIO V
H
OU T
B/C b AU DIO
AC IN
T
RG B OU
AU DIO
R
O
L/M ON
AU DIO
R
O
AU DIO
VID EO IN
AU DIO
AC Input
Connect the supplied power cable's three-
pin plug here, and plug the other end into
an active wall outlet. (See page E-17)

Carrying the Projector

Always carry your projector by the handle.
Ensure that the power cable and any other cables connecting to video
sources are disconnected before moving the projector.
When moving the projector or when it is not in use, cover the lens with
the lens cap.
E-6
Remote Sensor (See page E-11)
Image Sensor
For Auto Focus and Auto Wall Color
Correction. (See page E-47)
NOTE: The Auto Focus and the Auto Wall
Color Correction are not available on
MT860.
Lens
Adjustable Tilt Foot Lever
(See page E-19)
Adjustable Tilt Foot
(See page E-19)
Lens Cap
Remote Sensor (See page E-11)
PC Card Eject Button