How To Display And Navigate Menus; How To Enter Alphanumeric Data; Lcd Symbols And Meanings - Simrad RS10U Manual

1-3 How to Display and Navigate Menus

1. Hold down MENU (or CALL/MENU). Note that only four menu items can be displayed at any one
time on the screen.
2. Press + CH - to scroll up and down the menu until the cursor is positioned at the desired option.
Press ENT to display that option.
3. Make any entries or changes as explained in the following section.
4. Press ENT to confirm changes. Otherwise, press ESC to keep the original entry.
5. Press ESC to backup one screen or exit. Any changes are active as soon as you exit the screen.

1-4 How to Enter Alphanumeric Data

If your radio does not have the optional alphanumeric microphone, use the + CH - key to enter
alphanumeric data.
Press - to count through numbers, or hold down to scroll rapidly to the desired number.
Press + to step through the alphabet, or hold down to scroll rapidly to the desired character.
If you make an error, press - until < is displayed, then press ENT to backup and correct
the entry.

1-5 LCD Symbols and Meanings

This simulation shows the locations of all the following information symbols:
Simrad RS10 Operation and Installation Manual
6