Page 3
SAFETY _______________________________________________ Please note the following instructions If not already present, for additio- when using the appliance: nal protection it is recommend to install a residual-current-operated The appliance is designed for protective device (RCD) with a domestic use only. rated residual operating current Observe these instructions in not exceeding 30 mA in the electri- order to prevent damage to the...
POWER SUPPLY ___________________________________ Operation with rechargeable batteries When operating the appliance with When fully charged, the appliance the built-in nickel metal hydride works for around 45 minutes. It is battery, only use the power unit not advisable to charge the batter- supplied for charging.
POWER SUPPLY ___________________________________ Mains operation (with the Environmental note power supply unit) Check if the mains voltage on the type plate of the power supply unit This product has been made from supplied corresponds to your local high-quality parts and materials mains supply.
OPERATION ________________________________________ Special features The appliance has a stainless steel Place a towel around the neck cutting head. and shoulder of the person whose hair you are trimming. The appliance fastens the comb Make sure the person is seated so attachment automatically as soon as that their head is roughly at your it is switched on.
Page 8
OPERATION ________________________________________ Cutting lengths ... with the small comb ... with the large comb attachment attachment Position 1 4 mm Position 1 24 mm Position 2 6 mm Position 2 26 mm Position 3 7 mm Position 3 27 mm Position 4 9 mm Position 4...
OPERATION ________________________________________ Useful tips Beard trimming Hold the appliance with a Press the button to switch off relaxed and comfortable grip. the appliance. Always cut against the natural Take off the comb by setting the direction of the hair. telescopic comb adjuster position 1.
CLEANING AND CARE ___________________________ Cleaning and care Switch off the appliance and The cutting head of your appliance unplug it if you are running it does not normally need to be from the mains. oiled. If you want to maintain the original condition of the cutting Take off the comb and clean head for as long as possible, it is...
CLEANING AND CARE ___________________________ Adjusting the blades When new, the blades are optimally If the blades are not correctly aligned. However, you still need to aligned, switch off the adjust the blades if you replace appliance, loosen the screws them or if you have removed the again and readjust the blades.
INFORMATION ____________________________________ Technical data This product fulfils the European directives 2004/108/EC, 2006/95/EC and 2009/125/EC. Power supply Battery: nickel metal hydride Power supply unit: 100 – 240 V ˜ , 50/60 Hz 3.4 V DC 1000 mA Ni-MH Technical and design modifications reserved. 12 ENGLISH...