Multi Room - Philips 65PFL9708 User Manual

If you want to block a device that you previously connected,
you need to clear the Wi-Fi Miracast connections list first. If
you clear this list, you will have to confirm or block the
connection for every device again.
Screen delay
The normal delay when sharing a screen with Miracast is about
1 second. The delay might be longer if you are using older
devices/computers with less processing power.
Specifics
• Miracast on this TV is subject to the HDCP protocol and
cannot display copy-protected premium content sent by a
device.
• The maximum video resolution supported is 720p.
5.4

Multi room

What is Multi room ?
With Multi room you can wirelessly send -stream- digital TV
channels from another Philips TV to this TV. You can stream
any digital TV channel from the other TV, also channels from a
subscription smart card. If you can watch the digital channel on
the other TV, you can watch it on this one. If you don't have
an antenna connection in the room where this TV is, you can
use Multi room to watch the digital channels the other TV has
to offer.
If the type number of both TVs, end with an eight e.g. (the
screen size) PFLxxx8, you can switch on the other TV if it's in
standby with this TV. Also, recordings made with the other TV
and stored on its connected HDD can be watched on this TV.
Streaming a TV channel with Multi room will reduce the
resolution from HD to SD.
You cannot stream radio channels (audio only).
What you need
To stream and watch TV channels from another Philips TV,
the other TV needs to serve as a TV channel source. Both
TVs must be connected to your wireless home network.
In Help, read the chapter Network in Setting up to connect
this TV to your home network.
Smart TV / Multi room
If the other Philips TV has a model number that ends with a
seven, e.g. (the screen size) PFLxxx7 and it has the latest
software, you're all set.
On the other TV, read the Help chapter on Software update
to update its TV software.
Switch on from standby
If the type number of both TVs, end with an eight e.g. (the
screen size) PFLxxx8, you can switch on the other TV from
standby with this TV. Make sure you switch on the setting
Switch on with Wi-Fi on the other TV.
To switch on Switch on with Wi-Fi, press h, select S
Setup and press OK. Select Network settings > Switch on
with Wi-Fi and select On and press OK.
If all conditions on both TVs are met, you can use Multi room.
Using Multi room
First time use
When you start Multi room for the first time, switch on both
TVs.
Once this TV made a connection with the other TV, the other
one will appear automatically in the Browse network menu
even when it's in standby.
Stream a TV channel
With Multi room, you can watch the current TV channel or
open the channel list of the other TV. If you select a channel
from the list, the other TV will also switch to the channel you
selected. If the other TV has a build-in satellite tuner with
installed channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You cannot
switch channels while the other TV is recording, in Pause TV
mode or using Skype.
To stream and watch a TV channel from the other TV . . .
1 - Make sure the other TV is in standby* or switched on.
2 - On this TV, press c SOURCE, select Browse network
and press OK.
3 - If the TV is not yet connected to your home network, the
network installation will start automatically. If the TV is already
connected, go to step 4.
4 - In the Browse network menu, select the name of the
other TV and press OK. If you have several TVs in your home,
you might want to change the name of the other TV. You can
do that on the TV itself.
5 - Select what you want to watch from the other TV . . .
• to watch the current channel of the other TV, select Current
channel and press OK.
• to open the channel list of the other TV, select Watch TV
and press x (Right).
• to open the satellite channel list of the other TV, select
Watch satellite and press x (Right).
• to open the list of recordings* on the other TV, select
Watch recordings and press x (Right).
• you can switch channels with CH+ and CH-. You cannot
switch channels when the other TV is recording, in Pause TV
mode or using Skype.
47