BMW F 800 GS Adventure Rider's Manual page 105

Replacing LED for brake
light and tail light
The LED rear light can be
replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
Replace LED flashing turn
indicators
with LED turn indicators
The LED flashing turn indic-
ators can be replaced only as
a complete unit. Consult a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Removing bulbs for front
and rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
OE
Pull the glass out of the light
housing at the threaded-
fastener side.
Turn bulb 1 counter-clockwise
and remove it from the light
housing.
Installing bulbs for front
and rear turn indicators
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
8
103
z