Applications; New Construction; Retrofit/Replacement; Carrier Warranty - Carrier 52P User Manual

APPLICATIONS

Whether you are designing a new structure or replac-
ing packaged terminal air conditioning units in an
existing building, Carrier will meet your needs.
• Hotels and motels
• Nursing homes and assisted living care centers
• Offices
• Apartments
• Single-family dwellings
• Home conversions and residential add-ons

NEW CONSTRUCTION

The Carrier 52P and 52C Packaged Terminal Air Con-
ditioning (PTAC) unit is designed to meet the needs of
the architect, engineer, and contractor. For unit instal-
lation, Carrier's expert support network will assist in
all applicable aspects of the construction project, from
preparing a budget to start-up.
ADVANTAGES FOR NEW CONSTRUCTION
Design Flexibility For The Architect/Engineer
• Super-quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No water towers or additional cooling equipment
• No complex match-up
components
• Less sensitivity to building orientation (sun, wind,
shade)
• Optional architectural grille to permit custom exte-
rior appearance
Initial Cost Savings For The Building Owner
• No expensive component HVAC system purchase
• No equipment room or maintenance engineering
staff
• Two-part delivery to minimize on-site damage
of different HVAC
• Weather-protected wall sleeve that goes in place
during construction; chassis that slides in place after
construction
• No seasonal changeover required for cooling or
heating — units are self-contained comfort systems
Lower Operating Costs And Reliable Comfort
For The Occupant
• Heat pump models offer substantial savings over
models with conventional electric resistance heaters
• Individual units allow tenants to choose the degree
of comfort and operating economy
• Rapid servicing reduces downtime: complete chas-
sis can be replaced in minutes without disrupting
other occupants.
• Each unit operates independently of other units in
the building. No dependency by building on central
HVAC system.

RETROFIT/REPLACEMENT

If you are replacing existing units, your options
include:
• Replacing the existing wall sleeve with a Carrier
Weather Last™ sleeve
• Using an existing sleeve made by another manufac-
turer. The 52P and 52C Series chassis will fit exist-
ing GE, Amana, Trane, and Bryant wall sleeves and
no retrofit kit is required. All other sleeve applica-
tions need prior approval from Carrier.

CARRIER WARRANTY

Carrier's five-year warranty is the most comprehen-
sive in the industry. Carrier provides:
• Full coverage for parts and labor for first year.
• Four additional years of full coverage on sealed
refrigeration systems.
• Limited second through fifth year coverage on non-
refrigeration system parts.
3