Installation Side By Side - Samsung DV9*K60 series User Manual

NOTE
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the dryer is properly
grounded. Do not modify the plug provided with the dryer. If it does not fit the outlet,
have a proper outlet installed by a qualified electrician.
WARNING
If the product is not grounded, there is a danger of fire or electric shock.

Installation side by side

For proper installation, we recommend that you hire a professional. To install:
A. Level
B. Levelling feet
DV6000K_DC68-03709C_EN (U.K ).indd 17
A
B
1. Move your dryer to an appropriate
location for installation. Consider
installing the dryer and washer side-
by-side. Lay two of the carton cushion-
tops on the floor. Tip your dryer on its
side so it will lay across both cushion-
tops.
2. Set your dryer back in an upright
position.
3. Use a level (A) to check if the dryer is
level. If not, adjust the leveling feet (B)
at the bottom of the dryer. Repeat this
adjustment until the dryer is level.
CAUTION
• To ensure optimal performance, the
dryer must be level.
• To minimize vibration, noise, and
unwanted movement of the dryer, the
floor must be a flat, solid surface.
English 17
4/7/2016 2:17:35 PM