Suspensions
Hydraulic system layout
When roll is locked, the gear motor activates the
hydraulic pump indicated in the picture and pres-
surises the circuit.
The pressurised oil reaches the distribution frame
«T» and the pressure sensor «A». Then, the pipes
branch out to reach the upper joints on the side
steering tubes.
Through the rigid-flexible pipes inside the side
steering tubes, the oil reaches the stem sliding
locking device placed parallel to the shock absorb-
er.
Steering tubes
Remove the brake calliper pipe retainers and the
hydraulic pipe fitting from the brake calliper making
sure there is a container to collect the brake fluid.
SUSP - 256
MP3 500 ie SPORT Business LT (2011)