Whirlpool FSCR10420 Daily Reference Manual page 8

FUNCTIONS
Rinse hold (option on Spin button)
Avoids automatic spinning of the laundry at the
end of the programme. The laundry remains in
the last rinse water and the programme does not
continue.
Suitable for delicate laundry which is not suitable for
spinning, or which should be spun with a lower spin
speed. Not suitable for silk. To end the "Rinse hold"
function, choose between:
drain the water, no spin:
•
turn the knob to select spin speed "0", then
press "Start/Pause": The water will be drained
and the programme ended
spin the laundry:
•
the default spin speed flashes – start the spin
cycle by pressing "Start/Pause".
Or select a different spin speed by turning the
knob, press it to confirm, and press "Start/Pause".
Start delay
Moves the start of your programme to a later
time.
Do not use liquid detergent with this function.
• Select programme, temperature and options.
• Press the "Start delay" button – the start delay symbol
on the display flashes.
• Turn the knob to select a delay of up to 23 hours,
which will be shown on the display. Confirm by
pressing the knob.
• Press "Start/Pause" – the countdown for the delay
starts. The colon on the display flashes. The door locks.
• If you have selected Dosing Aid: When you press
"Start/Pause", the washing machine calculates the
recommended detergent amount. Add detergent as
indicated on the display (see "Dosing Aid"). Press
"Start/Pause" again to start the countdown for the
selected delay period.
• After the delay time has been reached, the washing
machine starts automatically. The display then
indicates the remaining programme duration.
To cancel "Start delay":
• Press "Start/Pause" to cancel start delay.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from Whirlpool Website
http://docs.whirlpool.eu
HOW TO OBTAIN THE USE AND CARE GUIDE
> Download the Use and Care Guide
WWW
from our website
http://docs.whirlpool.eu
code), specifying the product's commercial
code.
> Alternatively, contact our Client After-sales Service
001
8
(you can use this QR
Key lock
Locks the buttons and the knob on the
control panel against unwanted
operation.
To lock the buttons:
• The washing machine must be switched on.
• Press and hold the option button until the key
symbol on the display lights up. The knob and
the buttons are now locked. Only "On/Off" works.
If you switch the washing machine off and on
again, the key lock remains active until you
unlock it.
To unlock the buttons, press and hold the option
button again, until the key symbol on the display goes
off.
INDICATORS
Door can be opened.
Failure: Water tap closed. The washing
machine has no/insufficient water supply.
Failure: Water filter clogged. Water cannot be
drained; water filter might be blocked
Failure: Call Service. Refer to Troubleshooting
section in the Use and Care Guide.
In the event of any failures, refer to the Troubleshooting
section in the "Use and Care Guide".
CONTACTING OUR AFTER‑SALES SERVICE
You can find our contact details in
the warranty manual. When
contacting our Client After-sales
Service, please state the codes
provided on your product's
identification plate.
xxxxxxxxxxxx
4 0 0 0 1 0 8 6 6 0 8 2
Printed in Italy