Makita BTM40 Technical Information page 10

W
iring diagram
Fig. D-6
Wiring Lead Wires of LED Light Circuit in Head Cover
Put the slack portion of the Lead wires
in this shaded area.
Route the tube covering the Lead wires
through the space between Motor housing
and Housing cover.
Put LED light circuit in place in Head cover (L)
with the wire connecting portion on Head cover (L) side.
Fix the Lead wires
in this Lead wire holder.
boss B
wall
boss A
Route the tube covering the Lead wires
between boss A and boss B.
Motor housing
Housing cover
tube covering
Lead wires of
LED light circuit
LED Light circuit
Crank housing complete
Head cover (L)
wire connecting
portion
LED light circuit
rib
Route the tube covering the Lead wires
between the rib and the wall and
between the pin and the wall.
pin
P 10/10