Table of Contents
Advertisement
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the delete/int/conf button to
backspace and delete one character at a time.
4. Press the mute/menu OK button t o save your name. You will hear a
confirmation tone and the handset name shows in the display.
Registration
1. Your packaged handset(s) are pre-registered and ready to use. It is not
recommended that a handset be registered again unless absolutely
necessary.
From the Initial Setup Menu:
1. P re s s t h e c a l l e r I D - vo l u m e
REGISTRATION sub-menu.
2. Press the mute/menu OK button to enter the menu. YES or NO shows in
the display The default setting is NO.
3. Use the caller ID-volume (
4. If you select YES, press t h e mute/menu OK button. HOLD BASE FIND FOR
5 SECONDS,
THEN PRESS MENU O K KEY shows in the display. (Your handset should be held
near the base during registration process.)
5. Press and hold the find button on the base unit , the charge/in use indicator
flashes.
Press the handset mute/menu OK button. REGISTERING shows in the display.
REGISTERED shows in the handset's display. You may now rename your
handset.
(Refer to Step 3 & 4 of Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.
De-Registration
De-registration cancels registration. During the de-registration process, keep
the handset near the base.
From the Initial Setup Menu:
1. P re s s t h e c a l l e r I D - v o l u m e (
DEREGISTRATION sub-menu.
2. Press the mute/menu OK button to enter the menu. YES or NO shows in
the display, the default setting is NO.
3. Use the caller ID-volume (
(
o r
or
) button to scroll to YES or NO.
o r
or
) button to scroll to YES or NO.
12
)
b u t t o n t o s c ro l l t o t h e
)
b u t t o n t o s c ro l l t o t h e
Advertisement
Table of Contents
