DSL-6740U
5.
From the Interface drop-down list, select the value corresponding to the
LAN port that will be used as the WAN port.
6. Specify a name for your connection (any name for easier identification) in
the Name field.
7. For the PPPoE connection type, enter authorization data provided by
your ISP in the PPP section (the username (login) in the Username
field and the password in the Password and Password confirmation
fields). If these data have not been provided by your ISP, select the
Without authorization checkbox.
8. For the Static IP connection type, fill in the IP Address, Netmask,
and Gateway IP address fields in the IP section.
9. Deselect the NAT checkbox in the Miscellaneous section if your ISP
requires you to disable the network address translation function.
10. Click the Save button.
Quick Installation Guide
19