Setting Up The Power Supply; Connecting To Speakers Or Headphones - Yamaha DTXPRESS IV Owner's Manual

Drum trigger module
Hide thumbs Also See for DTXPRESS IV:
Table of Contents

Advertisement

1 Connections

2 Setting Up the Power Supply

A special power source adaptor supplies power to the DTX-
PRESS IV.
2-1. Make sure that the power switch of the DTXPRESS IV is
set to the STANDBY(?) position.
2-2. Connect the DC plug of the included AC power adaptor to
the DC IN jack on the rear panel.
To prevent the cord from being unplugged accidentally,
wrap the cord around the cable clip and secure it.
CAUTION
Make sure that the power adaptor's cord is not
bent at an extreme angle when wrapping the
cord around the clip. Doing this can damage or
sever the cord and create a fire hazard.
2-3. Connect the other end of the power cord to an AC outlet.
WARNING
• Please use the included AC power adaptor. The
use of any other adaptors may cause irregular
operation or damage to the device.
• Only use the voltage specified as correct for
the DTXPRESS IV. The required voltage is
printed on the name plate of the DTXPRESS IV.
CAUTION
• Unplug the AC Power Adaptor when not using
the DTXPRESS IV, or during electrical storms.
12
IV
DTXPRESS
Owner's Manual
3 Connecting to Speakers or
Headphones
Since the DTXPRESS IV has no built-in speakers, you'll need an
external audio system or a set of stereo headphones to properly
monitor it.
Monitor system for the DTX series
MS100DRJ, MS50DRJ, etc.
OUTPUT L/MONO and R jacks
CAUTION
Whenever making connections, make sure that
the plug on the cable being used corresponds to
the type of jack on the device.
● OUTPUT L/MONO, R jacks (standard mono phone)
These jacks allow you to connect the DTXPRESS IV to an exter-
nal amplifier + speakers and produce full, amplified sound, or
connect the DTXPRESS IV to audio recording equipment for
recording your own performance.
* Use the DTXPRESS IV's OUTPUT L/MONO jack when
connecting to a device with a mono input.
● PHONES jack (standard stereo phone jack)
Use the VOLUME knob on the rear panel to adjust the headphone
volume.
CAUTION
Do not use the DTXPRESS IV at a high volume
level for a long period of time, or your hearing
may be damaged.
Headphones
PHONES jack

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents