JVC HR-S9800U Service Manual page 7

Procedures for Lowering the Cassette holder assembly
As the mechanism of this unit is integrated with the Housing
assembly, the holder must be lowered and the two screws un-
screwed when removing the Mechanism assembly.
Fig. 1
Turn the loading motor pulley in the direction as indicated by
Å ı
Fig.2. As both and levers are lodged twice, push the
levers in the direction as indicated by Fig.3 to release them.
When pushing the levers, do it in the order of
When the holder has been lowered, turn the pulley until the
cassette holder is securely in place without allowing any up/
down movement.
Procedures for Lowering the Cassette holder assembly
(S1)
Fig. D1
1-2
Fig. 2
Fig. 3
Å ı ı Å
, , , .
1
(S1)
(S1)
(L2a)
(L2b)
EARTH
PLATE
<NOTE 2>
2
(S2b)
Fig. D2
(S3)
3
Fig. D3
(L2b)
(S2a)