Using Hdmi In Jack; Using Optical In Jack - LG HLB54S Manual

HLB54S-FP_BSGPLL_ENG_8666
Using HDMI IN jacks
You can enjoy the pictures and sound of your component with the HDMI
OUT jack.
1 Connect the HDMI OUT jack of your
component into the HDMI IN 1 or 2 jack on
the rear panel of this unit.
2 Turn the power on:
3 Select the [HDMI IN 1] or [HDMI IN 2] option: INPUT
4 Turn down the volume of this unit:
5 Turn your component on:
6 Adjust the volume of this unit:
Note:
• You cannot change the video resolution at the HDMI IN 1/2 mode.
Change the video resolution of the connected component.
• You cannot operate SIMPLINK function at the HDMI IN 1/2 mode.
Downloaded From TheatreSystem-Manual.com Manuals
9/15/09 5:33 PM
To the HDMI OUT jack of your component
(set-top box, digital satellite receiver, video game machine, etc.)
ON REMOTE
-
POWER
VOL.(+/-)
-
VOL.(+/-)
Page 53
• The setting of the sound mode is not available when Dolby Digital
Plus, Dolby TrueHD and DTS-HD are played at HDMI IN 1/2 mode.
• If the video output signal is abnormal when your personal computer is
connected to HDMI IN 1/2 jack, change the resolution of your personal
computer to 576p, 720p, 1080i or 1080p.
Using OPTICAL IN jacks
You can enjoy the sound of your component with the digital
optical jack from the unit and sub woofer.
To the digital optical output jack of your component
1 Connect the optical jack of your
component into the OPTICAL IN jack on
the rear panel of this unit.
2 Turn the power on:
3 Select the [OPTICAL] option:
4 Turn down the volume:
5 Turn your component on:
6 Adjust the volume:
ON REMOTE
-
POWER
INPUT
VOL.(+/-)
-
VOL.(+/-)
53