Table of Contents
Advertisement
Using the DVS system
Digital music files on a computer can be played by connecting the computer
2
trol disc
with the analog player (or DJ player).
1 Install rekordbox dj on your computer beforehand.
2 A special record or CD containing the signals necessary for operating digital music files.
About the settings of rekordbox dj
For details on the settings of rekordbox for using DVS, see "rekordbox dvs Setup Guide" on the web page below.
https://rekordbox.com/ja/support/manual.php
Setting the control signals
Set the control signals depending on whether your device is an analog player or DJ player.
Set the control signals as described below.
1 Connect this unit to the computer with a USB cable.
2 Launching rekordbox
3 Click [Preferences] > [Input channel] > [Settings Utility] of rekordbox (PERFORMANCE mode).
The setting utility of this unit starts.
4 Select the [CONTROLLER OUTPUT] tab in the setting utility and then select as shown below from the [DDJ-RZX
Audio Output] pull-down menu corresponding to the connected channel.
When analog player: [CH* Control Tone PHONO]
When DJ player: [CH* Control Tone LINE] or [CH* Control Tone CD]
Use each of an analog player and DJ player with a channel indicated in the table below.
Analog player
1
CH3
CH1
-
CH2
-
CH4
1
1
and an analog player (or DJ player) to this unit and then playing a con-
DJ player
1
1
1
1
37
En
Hide quick links:
Advertisement
Table of Contents
