Table of Contents
Advertisement
CoPyIng Channel memorIes
1.
To select a Channel Memory to be copied, press the Menu
will appear.
2.
Scroll with the Up
3.
The Channel Memory list from the OSD will appear.
4.
Highlight the channel to be copied by scrolling with the Up
5.
Once the Channel Memory to be copied is highlighted, select the Function
6.
The OSD for copying the memory will appear. Please use care not to select any of the delete functions associated with this
operation.
7.
Highlight "Copy" and select the Enter
one. For example, if the next available Channel Memory is channel 11, the copied channel will appear at channel 12.
ChangIng The numerICal loCaTIon of Channel memorIes
As a channel is being copied, the Channel Memory should be assigned to its proper location.
1.
Select the Channel Memory by pressing the Menu
2.
Scroll with the Up
3.
The channel list from the OSD will appear.
4.
Highlight the desired channel and select the Enter
5.
Scroll to the second slot that shows "Number" and select the Enter
6.
Select the desired number location by entering it onto the remote control keypad.
Wolf Cinema Quick Setup Guide
or
Down buttons; highlight and select "Channel Setup" by pressing the Enter
button: The Channel Memory will copy to the next available Channel Memory slot plus
or
Down buttons; highlight and select "Channel Setup" by pressing the Enter
button on the remote. The projector's On Screen Display (OSD)
Menu
or
Down buttons.
Func
button on the remote. The projector's OSD will appear.
Menu
button. The "Channel Edit" OSD will appear.
button.
4
button at the bottom of the remote control.
button.
button.
Advertisement
Table of Contents
