Disassembly and Reassembly
5-2) Door Sub Parts
Control Panel
1. Insert a flat-blade screwdriver on the slot as shown,
and unlock the tabs.
2. Disconnect the wire connector.
Door Handle
The door handles allow access into the refrigerator
and freezer. They are front mounted with screws.
1. Lift the handle upward motion with on.
Beverage Station
TM
The beverage station
refrigerator without opening the refrigerator door.
1. Open the door beverage station
2. With a small flat-blade screwdriver,take out the
rubber cap, then put it into the small hole and
push the button inside.
3. Take off its door.
Door Gasket
The door gasket is a molded gasket set into a
channel located in the door liner.
1. Open the door.
2. Grasp the gasket and pull in an outward motion
until the molded gasket separates from the door
liner.
35
allows access to the
TM
TM