Table of Contents
Advertisement
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, the Router Link LED or
Device Link LED is amber or red. If this happens, adjust the position of the extender:
•
If the Router Link LED is amber or red, move the extender closer to the router.
•
If the Device Link LED is amber or red, move the computer or WiFi device closer to the
extender.
Connect an Ethernet-Enabled Device
After an extender is connected to your existing WiFi network, you can connect wired devices
to the extender using an Ethernet cable. The device can then access your existing network
through the extender's WiFi connection.
Figure 4. Ethernet LAN port
AC1200 WiFi Range Extenders
Get Started
15
Advertisement
Table of Contents
