Making Your First Call - palmOne Treo 600 Using Manual

If No Service appears in the
upper left, you are out of a
wireless coverage area. If
you believe you are in a
wireless coverage area and
this problem persists,
contact Verizon for
assistance.
To adjust the contrast or
how the screen responds to
the stylus, run the
Welcome application at any
time. (see page 121).
Learn how to quickly redial
your most recent calls on
page 40.

14 :: Making your first call

Making your first call
We recommend that you charge your Treo for a full three hours (or until the LED is
solid green) before using it for the first time.
1. Press Phone .
2. If a Setup screen appears, follow the instructions to select a language and
calibrate the screen. If a Setup screen doesn't appear, you're ready to continue;
press Center to unlock the keyguard feature.
3. Press and hold the Wireless Mode button
tones.
4. Allow the Treo to complete a network search. The search may take several
seconds. When it's done, the network status icon
5. Tap the onscreen Dial Pad or use the number pad on the Treo keyboard to type
*228.
6. Press Center to dial, and follow the voice prompts to program your phone.
7. When programming is complete, use the 5-way navigation control to choose Hang
Up All.
. You will hear a series of ascending
appears in the upper right.