Table of Contents
Advertisement
2. Connect power to the camera again, and do not release the button during the
system booting.
3. It will take around 30 seconds to boot the camera.
4. Release the button when camera finishes process.
5. Plug in the Ethernet cable, and re-login the camera using the default IP
(http://192.168.0.20), and user name (admin) and password (admin).
If the dome housing is opened during installation, open the
package containing the silica gel and place it inside the dome for
avoiding humidity.
Note
Step 1
Step 2
Step 3
7
Advertisement
Table of Contents
