Installing Memoryframe's Usb Drivers - Pacific Digital MamoryFrame MF-810 User Manual

Figure 5 –Digital PixMaster Setup Program
Follow the on screen instructions to install Digital PixMaster to your
PC's hard-drive.
If however, the InstallShield Wizard does not automatically start to
install after one minute, click your mouse on START, then RUN, then
browse to your CD drive and select SETUP.EXE from the CD drive to
run. Finally, follow the on-screen instructions to install the Digital
PixMaster software application to your PC's hard-drive.
After the installation is completed, the Digital PixMaster icon will
automatically be located on your Windows Desktop.
Figure 6 – Digital PixMaster Icon
Digital PixMaster
To start Digital PixMaster double click on the icon.
6.4

Installing MemoryFrame's USB Drivers

MemoryFrame has custom USB drivers from Pacific Digital that are
shipped to you on the same software CD as Digital PixMaster. To load
them, with the MemoryFrame CD in your optical drive simply connect
your PC to your MemoryFrame with the USB cable that was provided in
the box with the unit.
Connect the larger "standard USB" connector to the USB port of the PC.
Connect the smaller "mini-USB" connector to the "PC" connector of the
MemoryFrame. Figure 7 shows the location of the "PC-to-
MemoryFrame" connector on the back of MemoryFrame.
Page 15
Copyright© 2002-2003 Pacific Digital Corporation