Sprint SLATE 10 User Manual page 15

2. Plug the other end of the USB cable into the AC adapter.
3. Plug the AC adapter into an electrical outlet.
4. After charging, disconnect the tablet from the charger.
Unplug the AC adapter from the outlet, and remove the micro USB cord from the tablet and
l
the AC adapter.
Note: Always unplug the charger from the wall socket after the tablet is fully charged to save
unnecessary power consumption of the charger.
Charge Using a PC Connection
Before using a PC connection to charge your tablet, ensure that the computer is turned on.
Depending on the type of connection, your tablet's battery may not charge.
1. Insert the small end of the micro USB cord into the charger/accessory jack on the top of your
tablet.
2. Insert the large end of the micro USB cord into an external USB port on your computer.
3. After charging, safely remove the micro USB cord from both the tablet and the computer.
Get Started 8