Table of Contents
Advertisement
N1. CAUTION! Do not let the blade
cut in the risk sector to prevent
kickback (see paragraph "Safety
precautions").
Cutting with the blade is recommended for
thinning the grass, especially when tall and
sturdy.
N2. The grass is cut with swinging motions from
side to side, maintaining the blade parallel to the
ground. Cut the grass moving from left to right,
without cutting on the return stroke from right to
left. KICKBACK can occur when cutting is done
with the risk sector of the blade; we recommend
cutting with the rest of the blade. To prevent any
This section contains information useful for
maintaining the characteristics of eco-
compatibility included in the origin design of the
machine, and as regards proper use and
disposal of oil and fuel.
Design
In the design stage, care was taken to develop
an engine with reduced consumption and low
emissions of noise and pollutant exhaust fumes.
Use of machine
The operations of filling the tank with the fuel
mixture should be carried out in such a way as to
Make sure the STOP switch is on I.
Make sure that the fuel tank is at least 25%
full.
Make sure the air filter is clean.
Remove the sparkplug, dry and clean it,
then return it to its place. If necessary,
replace it.
Change the fuel filter. Contact your
supplier.
Follow the correct procedure for assembly
of the cutting accessories.
Make sure the metal accessories are sharp,
and contact your supplier if necessary.
The engine continues to have problems: contact your authorized supplier
recoil of the blade, make sure the supporting cup
does not touch the ground.
O. Environmental information
avoid spilling fuel and contaminating the soil and
environment.
Periods of prolonged disuse
Always empty the fuel tank with the same
precautions used in filling it (O).
Disposal
Do not dispose inappropriately of the machine
when it is no longer usable. Deliver it to an
authorized organization for proper disposal in
compliance with the regulations in force.
P. Troubleshooting table
The engine does
not start
●
●
●
●
N1. CAUTION! WE RECOMMEND
THE USE OF ORIGINAL
ACCESSORIES AND
REPLACEMENTS; THESE CAN BE
FOUND AT YOUR OFFICIAL
DISTRIBUTOR'S. THE USE OF
ACCESSORIES AND
REPLACEMENTS THAT ARE NOT
ORIGINAL INCREASES THE
DANGER OF ACCIDENTS AND IN
THIS CASE THE MANUFACTURER IS
NOT LIABLE FOR ANY DAMAGES
TO PERSONS OR PROPERTY.
The engine
stutters or loses
power
●
●
●
●
The machine
starts but does
not cut properly
●
●
ENGLISH - 11
Advertisement
Table of Contents
