Page 1
Marco Beverage Systems Ltd. INSTRUCTIONS FOR MODELS OCEANIC 8.4kW (P/N: 1000179D) Water pressure : 5 - 50 psi (min.-max.)35 - 345 kPa (min.-max.) Marco Beverage Systems Limited. Marco Beverage Systems Limited. 63d Heather Road, Shire House, Strixton Manor, Sandyford Industrial Estate, Strixton, Wellingborough, Northants, Dublin 18.
Page 2
Installation details: Power Supply: Oceanic (8.4kW/400Vac. 3 PHASE) - This unit must be connected to a suitable 3 phase power supply. This should be done by a qualified electrician. Water Pressure: 5 - 50 psi (min.-max.) 35 - 345 kPa (min.-max.) Installation procedure: ...
Page 3
black fitting from the font using the supplied hose clip. Connect the black wire coming from the water boiler to the wires coming from the font base (it doesn’t matter which wire goes to which connector on the font) Operating boiler for the first time: Turn the water on at stop valve and switch the power on at the switch on the front of the machine.
Page 4
Maintenance: Marco machines have been designed to give many years of trouble free service. The only regular maintenance required is occasional de -scaling. Isolate machine from power supply. Isolate machine from water supply. ALLOW TO COOL COMPLETELY! ...