Samsung WF455ARG SERIES User Manual page 68

troubleshooting
ERROR CODE
tE
3E
2E
AE
AE4
AE3
AE5
8E
SF1
SF2
SF3
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
68_ troubleshooting
WF455AG-03159A-07_EN.indd 68
A temperature sensor problem.
Restart the cycle. If the code reappears, call customer service.
A motor problem.
Restart the cycle. If the code reappears, call customer service.
High/Low voltage detected.
Restart the cycle. If the code reappears, call customer service.
A Communication error between the SUB(Sensor) PBA and the MAIN PBA
Call customer service.
A Communication error between the WIFI PBA and the MAIN PBA
Call customer service.
A Communication error between the DR Module and the MAIN PBA
Call customer service.
A Communication error between the LCD PBA and the MAIN PBA
Call customer service.
A MEMS sensor problem.
Call customer service.
A system error
Call customer service.
Too many suds are detected during the wash session. The unit is put on hold until
the amount of suds have been reduced. The unit will then go back to operating.
When it finishes washing, the "End" and "SUdS" codes will blink in turn.
MEANING & SOLUTION
2013-12-13 11:51:41