Canon SELPHY CP1200 User Manual page 119

ç Contents
Charging the Battery to Use SELPHY
•
Once power is connected
blinks on the screen.
• When charging is finished in about four hours (at room
temperature), [
• SELPHY can be used even while [
on (= 22). However, charging stops. When the power is turned
off, [ ] blinks and charging resumes.
•
For battery precautions, refer to the battery user manual.
•
When [
operating temperature
the ambient temperature.
• When [
its life. Please purchase a new battery.
• When [
<q> button for 3 seconds or more to clear [
and the screen is off, press any button other than the <q> button to
display [
(= 22), charging starts and [
] will no longer be displayed.
] is displayed, place SELPHY in an environment at
(= 121), and charge once it has adjusted to
] is displayed in red, the battery has reached the end of
] is displayed, press and hold any button other than the
] for approximately 10 seconds.
] is blinking by turning it
]. Also, if charging
119
]