Installing The System Fan; Removing The Power Switch - Dell OptiPlex 3020–Mini Tower Owner's Manual

Installing the System Fan

1. Place the system fan in the chassis.
2. Pass the four grommets through the chassis and slide outward along the groove to secure in place.
3. Connect the system-fan cable to the system board.
4. Install the cover.
5. Follow the procedures in

Removing the Power Switch

1. Follow the procedures in
2. Remove the:
a) cover
b) front bezel
c) optical drive
3. Perform the following steps as shown in the illustration:
a) Press the power cable [1].
b) Disconnect the power-switch cable from the system board [2].
After Working Inside Your Computer .
Before Working Inside Your Computer .
23