Mersey Super - Installation & Service Instructions
Page 26 of 35
Page 15
REPLACEMENT OF PARTS - Page 16
Fig. 33
6.10. HEATING UNIT
a. Gain general access -see 6.2.
b. Drain the appliance -see 6.6.
c. Remove the 2 screws securing the energy cut-off device to the heating unit (located top
front left).
d. Disconnect the 2 unions.
e. Remove 4 screws securing the unit to the chassis.
f. Carefully pull the unit from the top and lift. DO NOT lose the '0' rings and washers.
g. Remove the primary flue, secured by 4 screws (2 front, 2 rear).
file://P:\System\DATA\Dx\DS1\installation\2551\I24-2551\I24-2551.htm
09/12/2009