Yamaha FJR13AEX(C) Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Ambient temperature,
neous fuel consumption and aver-
age fuel consumption modes
3
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. "SELECT" button
3. "RESET" button
Push the "RESET" button to switch the
display between the ambient tempera-
ture mode "Air", the instantaneous fuel
consumption mode "MPG" and the av-
erage fuel consumption mode "AV_ _._
MPG" in the following order:
Air → MPG → AV_ _._ MPG → Air
instanta- Ambient temperature mode
1. Ambient temperature
This display shows the ambient tem-
perature from 16 °F to 122 °F in 1 °F in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
NOTE:
G
If the ambient temperature falls be-
low 16 °F, a lower temperature
than 16 °F will not be displayed.
G
If the ambient temperature climbs
above 122 °F, a higher tempera-
ture than 122 °F will not be dis-
played.
G
The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
This display shows the distance that
can be traveled on 1.0 US.gal of fuel
under the current riding conditions.
NOTE:
If traveling at speeds under 10 km/h
(6.0 mi/h), "_ _._" will be displayed.
3-8
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.