Download Print this page
Nemtek MERLIN M25 User Manual
Nemtek MERLIN M25 User Manual

Nemtek MERLIN M25 User Manual

Merlin m-series - electric fence control panel
Hide thumbs Also See for MERLIN M25:

Advertisement

Quick Links

GROUP OF COMPANIES
MERLIN M-SERIES -
Electric Fence Control Panel
USER MANUAL
FENCE
GATE
SERVICE
DUAL ZONE
M28
M25

Advertisement

loading

Summary of Contents for Nemtek MERLIN M25

  • Page 1 GROUP OF COMPANIES MERLIN M-SERIES - Electric Fence Control Panel USER MANUAL FENCE GATE SERVICE DUAL ZONE...
  • Page 2 MERLIN Electric Fence Control Panel User Manual SWITCH THE FENCE ON / OFF To switch the fence On or Off, enter your four digit PIN followed by the # key. The control panel will beep twice to confirm that the fence is off and three times when the fence is turned on. •...
  • Page 3 MERLIN Electric Fence Control Panel User Manual BYPASS THE SIREN AND STROBE LIGHT (SILENT ALARM) Enter your PIN and push the * key, enter the digit ‘4’, then push the # key. The control panel will beep 3 times to confirm the siren and strobe light is bypassed. The beeper in the control panel and the energizer unit will still be active.
  • Page 4 MERLIN Electric Fence Control Panel User Manual MAKE THE GATE ALARM DELAYED (GATE 1 & 2) VERSION KEYPAD Enter your PIN and push the key, enter the digit ‘4’, then push the # key. The control panel will beep twice to confirm that the gate 1 & 2 alarms are delayed. The default delay time is 4 minutes. VERSION Enter your PIN and push the * key, enter the digit ‘2’...
  • Page 5 MERLIN Electric Fence Control Panel User Manual BYPASS THE GATE ALARM (GATE 1) VERSION Enter your PIN and push the key, enter the digit ‘1’, then push the # key. The control panel will KEYPAD beep 3 times and the GATE ALARM and GATE 1 lights will start flashing slowly to confirm that the gate 1 alarm is bypassed.
  • Page 6: Key Definitions

    MERLIN Electric Fence Control Panel User Manual TURN THE GATE CHIME ON / OFF (GATE 2) Push the key, enter the digit ‘2’, then push the # key. The control panel will beep twice to VERSION confirm that the gate chime is turned off and three times if it’s turned on. If the chime is on, the control KEYPAD opens.
  • Page 7: Nemtek Group Outlets

    Service alarm is SERVICE BYPASS FLASH switched off ALARM MEMORY (ON) (ON) (ON) Old alarm condition NEMTEK GROUP OUTLETS RANDBURG EDENVALE Tel: +27 (0)11 462-8283 Tel: +27 (0)11 453-1970 Fax: +27 (0)11 462-7132 Fax: +27 (0)11 453-1858 Web site: http//www.nemtek.com E-mail: nemtek@nemtek.co.za...