Switching Between Recent Applications; Un-Locking The Screen; Single User Mode - Motorola MC40 User Manual

44 | Using the MC40
Note: See
Home screen.

Switching Between Recent Applications

Procedure:
1
Touch and hold
used applications.
Figure 26: Recently Used Applications
2 Slide the window up and down to view all recently used applications.
3 Swipe left or right to remove application from the list and force close the application.
4
Touch an icon to open it or touch

Un-Locking the Screen

Use the Lock screen to protect access to data on the MC40. Some email account require locking the screen. Refer to
the MC40 Integrator Guide for information on setting up the locking feature. The Locking feature functions
differently in Single User mode or Multiple User mode.

Single User Mode

When locked, a pattern, PIN or password is required to unlock the device. Press the Power button to lock the screen.
The device also locks after a pre-defined time-out.
Press and release the Power button to wake the device.
The Lock screen displays. Slide
Pattern screen appears instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.
July 2015 | MN000111A04-A
Application Shortcuts and Widgets on page 37
(Jelly Bean) or (KitKat). A window appears on the screen with icons of recently
to return to the current screen.
up to unlock the screen. If the Pattern screen unlock feature is enabled, the
for information on creating a shortcut on the