Functional Specification Of The Shortcut Key - Pioneer DV-285-S Service Manual

5

7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY

Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC
Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC
key of the remote control unit. To quit, press the ESC key
key of the remote control unit. To quit, press the ESC key
Command Contents
Command Contents
Memory clear and region / revision indication
Memory clear and region / revision indication
Average value measurement of DVD error rate
Average value measurement of DVD error rate
CD error rate measurement
CD error rate measurement
Scart terminal output : VIDEO
Scart terminal output : VIDEO
Scart terminal output : S-VIDEO
Scart terminal output : S-VIDEO
Scart terminal output : RGB
Scart terminal output : RGB
Progressive OFF
Progressive OFF
Progressive ON
Progressive ON
ZOOM ON (X2 -> X4 -> x1)
ZOOM ON (X2 -> X4 -> x1)
Service mode indication (error rate indication, etc.)
Service mode indication (error rate indication, etc.)
Model information indication
Model information indication
Title search Input mode IN
Title search Input mode IN
Title No. input
Title No. input
Search execution
Search execution
Region confimation mode
Region confimation mode
• Service mode indication (ESC + CHP/TIM keys)
• Service mode indication (ESC + CHP/TIM keys)
ID Address
ID Address
The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.
The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.
EDC/ID/AV 1 error history (ID Address, EDC/ID Error, last eight errors)
EDC/ID/AV 1 error history (ID Address, EDC/ID Error, last eight errors)
• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)
• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)
The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is
The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is
displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)
displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)
For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
• Indication of model information (ESC + CHAP keys)
• Indication of model information (ESC + CHAP keys)
The items from 12 to 15 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to
The items from 12 to 15 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to
CHIP VERSION, and M is changed to RF VERSION. For details, see 7.1.4.
CHIP VERSION, and M is changed to RF VERSION. For details, see 7.1.4.
• Region confirmation mode (ESC + A.MON [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)
• Region confirmation mode (ESC + A.MON [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)
After you press the A.MON key while holding the ESC key pressed and then input the region number, if the number is different from that set in
After you press the A.MON key while holding the ESC key pressed and then input the region number, if the number is different from that set in
the unit, an error message is displayed, and the tray opens.
the unit, an error message is displayed, and the tray opens.
5
6
Conditions
Conditions
WY, models equipped with Scart terminal
WY, models equipped with Scart terminal
Only for progressive models
Only for progressive models
DV-285-S
6
7
Remote Control
Remote Control
Key Name
Key Name
CLEAR (∗1)
CLEAR (∗1)
5 (∗1)
5 (∗1)
5 (∗1)
5 (∗1)
AUDIO
AUDIO
SUBTITLE
SUBTITLE
ANGLE
ANGLE
R_SKIP
R_SKIP
F_SKIP
F_SKIP
ZOOM
ZOOM
CHP/TIM (∗1)
CHP/TIM (∗1)
CHAP (∗1)
CHAP (∗1)
SIDE A (∗1)
SIDE A (∗1)
Numbers (∗1)
Numbers (∗1)
PLAY (∗1)
PLAY (∗1)
A.MON (∗1)
A.MON (∗1)
Numbers (∗1)
Numbers (∗1)
∗1 : Test mode remote control unit
∗1 : Test mode remote control unit
7
8
Remote
Remote
A
Control Code
Control Code
A8-45
A8-45
A8-05
A8-05
A8-05
A8-05
AF-BE
AF-BE
AF-36
AF-36
AF-B5
AF-B5
A3-9D
A3-9D
A3-9C
A3-9C
AF-37
AF-37
B
A8-13
A8-13
A8-40
A8-40
A8-4D
A8-4D
A8-00 to A8-09
A8-00 to A8-09
A8-17
A8-17
A8-1E
A8-1E
A8-01 to A8-08
A8-01 to A8-08
C
D
E
F
51
8