Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Alcatel ONE TOUCH X600
Summary of Contents for Alcatel ONE TOUCH X600
-
Page 1: Quick Start Guide
Quick Start Guide CJB26Q0ALAAB... - Page 2 Welcome! This manual brief is the profile of your USB-Modem, about the details of how to set the management parameters, see help information on the web management page. This product meets applicable national SAR limits of 2.0W/kg. The specific maximum SAR values can be found in the following section of this user guide.
-
Page 3: Getting To Know Your Modem
Getting to Know Your Modem USB Interface Strap Hole Indicator LED SIM/USIM Card Slot... - Page 4 Note: You can tie the cap and modem by threading a strap through the strap hole to avoid cap missing. How to start your modem Remove the cap from the USB modem. Insert the SIM/UMSIM card into card slot on back of modem. Insert the USB modem into computer’s USB port.
- Page 5 displayed, the modem connects to the network automatically. The modem’s web management page will be displayed every time automatically when the modem is inserted into the computer. After the program is installed, a shortcut icon for the management program appears on the desktop. You can also double-click the shortcut icon on the desktop to start the management program.
- Page 6 LED Indicates (Following table are listed the LED Indicates for each status.) LED Indicator Description Flashing Red Searching network Solid Red No Service, No SIM or SIM error Flashing Green Registering into 2G network Solid Green Connected to 2G network Flashing Blue Registering into 3G network Solid Blue...
-
Page 7: Safety And Use
Safety and Use We recommend that you read this chapter carefully before using the USB-Modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the USB-Modem or of use contrary to the instructions contained herein. Traffic Safety When driving, do not use the USB-Modem ... -
Page 8: Conditions Of Use
Conditions of Use Switch the USB-Modem off before boarding an aircraft. Switch the USB-Modem off when you are in health care facilities, except in designated areas. As with many other types of equipment now in regular use, the USB-Modem can interfere with other electrical or electronic devices, or equipment-using radio frequencies. -
Page 9: Weee Approval
conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s recommended operating temperature range is -10°C to +50°C. Do not open, dismantle or attempt to repair the USB-Modem yourself. Do not drop, throw or bend the USB-Modem. ... -
Page 10: Radio Waves
Radio Waves Proof of compliance with international standards (ICNIRP) or with European Directive 1999/5/EC (R&TTE) is required of all modem models before they can be put on the market. The protection of the health and safety for the user and any other person is an essential requirement of these standards or this directive. - Page 11 Maximum SAR for this model and conditions under which it was recorded. Body-worn SAR WCDMA2100 0.629 During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call.
- Page 12 that if you are interested in further reducing your exposure then you can easily do so by limiting your usage or keep the device away from the head and body. For more information you can go to www.alcatelonetouch.com Additional information about electromagnetic fields and public health are available on the following site: http://www.who.int/peh-emf The USB-Modem is equipped with a built-in antenna.