Audio Playback - DXG 572v User Manual

Audio playback:

1: Under playback mode, use the up button▲ or down button▼ to select the audio file. After
the file has been selected, press Play button to begin playback. If the user wishes to playback
audeo clips not recorded by the camera, please rename the file in the format WAVE0001
before copying onto the camera. The 4 digits after WAVE should correspond to the current
number of files already on the camera, with extensions of wav; after that copy the file to
under the directory DCIM/100FSCAM. If no such directory exists, please first record a short
audeo clip and then copy the files to the directory that contains the recorded video clip
(please note that the camera only supports WAV format audio files).
2: Press play button again to stop playback.
3: During playback, press the Shutter to pause playback, or then press the Shutter again to
resume play.
Volume adjustment:
During the audio playback, press the Up button▲ or Down button▼ to adjust the volume.
Control procedures as below:
Adjust volume
Downloaded From CamcorderManual.com DXG Manuals
shutter
26