Remove The C1-Board; Remove The Front Bracket; Remove The C2-Board; Remove The G-Board And Gs- Board - Panasonic TH-50PE8U Service Manual

7.13. Remove the C1-Board

1. Remove the A-Board unit. (See section 7.4.)
2. Remove the Stand bracket R. (See section 7.12.)
3. Remove the flexible cables holder fastening screws (×10
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and
CB5).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×6

7.14. Remove the C2-Board

1. Remove the A-Board unit. (See section 7.4.)
2. Remove the stand bracket L. (See section 7.12.)
3. Remove the flexible cables holder fastening screws (×6
).
4. Disconnect the flexible cables (CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C22).
7. Remove the screws (×4

7.15. Remove the C3-Board

1. Remove the A-Board unit. (See section 7.4.)
2. Remove the flexible cables holder fastening screws (×6
).
3. Disconnect the flexible cables (CB9, CB10 and CB11).
4. Disconnect the flexible cable (C32).
5. Disconnect the connector (C33).
6. Remove the screws (×4
) and remove the C1-Board.
) and remove the C2-Board.
) and remove the C3-Board.

7.16. Remove the Front bracket

1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A51 and A52). (See section
7.4.)
3. Remove the screws (×2
Front bracket.
7.17. Remove the G-Board and GS-
Board
1. Remove the Front bracket. (See section 7.16.)
2. Remove the screws (×2
3. Remove the screws (×3
4. Remove the Front shield case front.
5. Disconnect the connector (GS52).
6. Remove the screws (×2
7. Remove the Front shield top.
8. Remove the screws (×2
9. Remove the screws (×3
20
, ×2
) and remove the
).
).
).
) and remove the GS-Board.
).