Yamaha BLASTER YFS200V Owner's Manual page 282

q
w
1. Sponge material
1. Mousse
1. Material esponjoso
2. Frame
2. Armature
2. Marco
3. Remove the air filter element, and separate
the sponge material from its frame by
removing the screw.
4. Wash the sponge material gently but thor-
oughly in solvent.
w
Always use parts cleaning solvent to clean
the sponge material. Never use low flash
point solvents or gasoline to clean the
sponge material because the engine could
catch fire or explode.
5. Squeeze the excess solvent out of the
sponge material and let it dry.
cC
Do not twist the sponge material when
squeezing it.
8-33