Installing Lp Gas Tank; Operating Instructions; Checking For Leaks; Disconnecting Lp Gas Tank - Blue Rhino GBT1509LR Owner's Manual

Recipes
BlueRhino.com/recipes
13
Lock Lid
Note: Lid must be locked before transporting grill.
Unlock Lid
Note: Always unlock and open lid before lighting grill.
Need help? 1.800.762.1142
Do not return to place of purchase.
Replacement Parts
parts.BlueRhino.com
1.800.762.1142

Installing LP Gas Tank

When you choose to use propane, this grill is designed
to operate with a 1 lb. 7.75 in. or 10.6 in. high
disposable / 16.4 oz. or 14.1 oz. propane gas tank
(DOT 39 Cylinder) (Figure 1).
DO NOT ATTEMPT TO REFILL ANY 1 lb. (16.4 oz. or
14.1 oz.) PROPANE GAS TANKS!
Connecting LP Gas Tank
Only cylinders marked "propane" may be used.
Note: 1 lb cylinders may form frost when near empty.
1. Make sure the regulator/control knob is in the
" OFF" position (Figure 2).
2. Lubricate the threads of the regulator/control
knob with petroleum jelly. Line up threads on LP
gas tank with regulator/control knob.
3. Insert and rotate LP gas tank clockwise until
they fit snugly together. HAND TIGHTEN ONLY. Be
careful not to crossthread when screwing in tank
(Figure 3).
4. Perform leak test per "Checking for Leaks"
section.

Disconnecting LP Gas Tank

1. Turn the regulator/control knob to the " OFF"
position (Figure 2).
2. Rotate LP gas tank counterclockwise until it is
detached (Figure 4).
3. Store the LP gas tank in a proper location, per
instructions on the LP gas tank.

Operating Instructions

Checking for Leaks

Burner Connections
1. Make sure the regulator/control knob is securely
fastened to the burner.
Note: The brass nut should be 1/4 to 1/2 turn past
tight. The regulator will rotate 360º even when the
brass nut is tightened.
If your unit was assembled for you, visually check
the connection between the burner and regulator/
control knob (Figure 5).
W WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion
which can cause death, serious bodily
injury or damage to property.
2. If the burner and regulator/control knob do not
fit properly or if you have any questions, please
contact 1.800.762.1142 for assistance.
Tank/Gas Line Connection
1. Make 2-3 oz. of leak detection solution by mixing
one part liquid dishwashing soap with three parts
water.
2. Make sure regulator/control knob is in the
" OFF" position (Figure 2).
3. Apply the leak detection check solution on all "X"
locations (Figure 5).
a. If any bubbles appear, remove the LP gas tank and reconnect, making sure the
connection is secure.
b. If you continue to see bubbles after several attempts, remove the LP gas tank per
"Disconnecting LP Gas Tank" section, and contact 1.800.762.1142 for assistance.
c. If no bubbles appear after one minute, turn regulator/control knob to the " OFF"
position, wipe away solution and proceed.
First Use
1. Make sure all labels, packaging and protective films have been removed from the grill.
2. Remove manufacturing oils before cooking on this grill for the first time by operating
the grill for at least 15 minutes on (HIGH) with the lid closed. This will "heat clean" the
internal parts and dissipate odors.
9
Figure 1
1 lb
1 lb
465 g
453 g
3.875 in. / 9,8 cm
2.9 in. / 7,4 cm
Figure 2
Figure 3
Figure 4
Figure 5
X
X