Table of Contents
Advertisement
EXPLODED VIEWS AND PARTS LIST
NOTE:
• The mechanical parts with no reference number in the
exploded views are not supplied.
• Items marked " * " are not stocked since they are seldom
required for routine service. Some delay should be
anticipated when ordering these items.
• When two or more parts are shown in parallel, use the
part described first as the main part.
• The indication [CH] is used for identification of part type.
• Regarding the boards of this model, the discrete parts
on the boards cannot be replaced. However, Some
connectors can be replaced.
How to use properly the repair parts.
There are some parts that use the 2 types ; the [CH] parts or alternately the [JP] parts, in this series.
Use the [CH] repair parts for the [CH] type product, vice versa.
[ How to identify the parts ]
1M2X4
Special Head (Black)
Identfication Seal
A-xxx-xxx-A x xxxxxxxxx
1 : Using [JP] type
6 : Using [CH] type
[ Repair part description example ]
Ref.No. Part No.
Description
999
A-8110-582-A [CH]...MBX-65 ASSY (C) (S)
999
4-8067-424-A [JP]...MBX-65 ASSY (S)
∗
About Repair level of mounted board.
JP type... Component level service is possible. Refer to this manual for details.
CH type... Do not execute the component level service in principle.
However, some of the connectors can be repaired by the component level service.
Refer to "Connector Section" of this manual for details.
CHAPTER 3.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
2DIMM Door
Serial No.
Identification seal is attached on the
expansion memory connector.
3-1
Confidential
PCG-GRX520/GRX520K/GRX520P/
3-2
PCG-GRX560/GRX560K/GRX560P/
PCG-GRX580/GRX580K/GRX580P/GRX650
(AM)
Advertisement
Table of Contents
