Listening To An External Source - Teac SR-LUXi Owner's Manual

Listening to an External Source
o
Connect the AUX IN jack of the SR-LUXi to the
PHONES jack (audio output jack) of a portable
audio player using the supplied stereo mini-
plug cable.
• You can use this means of connection to listen to
an iPod that do not have a dock connector.
For information on iPod/iPhone compatibility, see
page 12.
D
Press the FUNCTION button to select AUX.
f
AUX
IN
• You can also use the AUX button on the remote
control unit to select AUX.
D
Play the source, and adjust the volume of both
the SR-LUXi and the connected audio player.
• When using the PHONES jack of the audio player,
you must adjust its volume or you might not hear
any sound from the SR-LUXi.
• Turning the volume of the audio player up too high
might cause the sound output by the SR-LUXi to
be distorted. If this happens, reduce the volume
of the audio player until the distortion stops and
then adjust the volume level of the SR-LUXi to a
comfortable listening level.
18
r
~.1~1
L - - - _VOLUM----:'
+~