Download Print this page

Audio Sources - C. Crane FM Transmitter 2 Operating Instruction

Hide thumbs Also See for FM Transmitter 2:

Advertisement

Introduction
Thank you for purchasing the FM Transmitter. It transmits high-fidelity audio
from any audio source such as a mobile phone, computer, television, or
music player to any nearby FM radio. Superior engineering and construction
techniques were used to bring you the highest quality FM transmitter
possible. Digital tuning and Phase Locked Loop technology have been
incorporated for FM band frequency coverage from 87.5 MHz to 108.0 MHz,
with stability and superb audio quality.

Audio Sources

From a music player to a radio: Connect the plug that is attached to the FM
Transmitter to the Line Out or headphone jack of the MP3 player. Tune your
radio or car stereo to the transmitting frequency.
From your internet radio or computer to your home stereo: Connect the
plug that is attached to the FM Transmitter to the headphone jack on your
speakers or to the audio output of the computerʼs sound card. Tune your
receiver to the transmitting frequency.
From a mobile phone to your car stereo: Connect the plug that is attached
to the FM Transmitter to the Line Out or headphone jack of the phone. Tune
your car stereo to the transmitting frequency.
From a portable radio to a pocket radio: Connect the plug that is attached
to the FM Transmitter to the Line Out or headphone jack of your radio. Tune
your pocket radio to the transmitting frequency.
This is sometimes good for office or warehouse environments where
reception is only available in a window or other specific location.
Page 4
FM Transmitter 2

Advertisement

loading