Removing A Wheel - Yamaha YFM50RY Owner's Manual

ECB00640
NOTICE
1
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
2
fuse.
2. Remove the blown fuse, and then install a
3
new fuse of the specified amperage.
4
Specified fuse:
5.0 A
5
EWB02171
6
WARNING
7 Always use a fuse of the specified rating, and
never use a substitute object in place of the
8
proper fuse. An improper fuse or a substitute
object can cause damage to the electrical sys-
9
tem, which could lead to a fire.
3. Turn the key to "ON" and turn on the electrical
10
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
11
Yamaha dealer check the electrical system.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
Front
1. Wheel nut
8-29
1
1