buttons, turn the key to "ON".
When the digits start flashing,
push the "SELECT" button to
change between kilometers and
miles.
Tachometer
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the
tachometer needle sweeps once
across the r/min range and then
returns to zero r/min in order to test
the electrical circuit.
INSTRUMENT AND CONTROL FUNCTIONS
NOTICE
Do not operate the engine in the
tachometer red zone.
Red zone: 7500 r/min and above
Tripmeter and tachometer modes
1. Odometer
2. Tripmeters/fuel reserve tripmeter
3. "SELECT" button
4. "RESET" button
Pushing the "SELECT" button swit-
ches the display between the tripme-
ter modes "TRIP 1" and "TRIP 2" in
the following order:
TRIP 1
TRIP 2
TRIP 1
3-7
ECA10031
When the fuel amount in the fuel tank
decreases to XT660Z 6.7 L (1.76 US
gal, 1.46 Imp.gal) - XT660ZA 5.8 L
(1.53 US gal, 1.28 Imp.gal), the bot-
tom segment of the fuel meter starts
flashing, and the tripmeter display
automatically changes to the fuel
reserve tripmeter mode "F-TRIP" and
starts counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the
display between the various tripmeter
modes in the following order:
F-TRIP
TRIP 1
To reset a tripmeter, select it by pus-
hing the "SELECT" button, and then
push the "RESET" button for at least
four seconds. If you do not reset the
fuel reserve tripmeter manually, it
resets itself automatically and the dis-
play returns to the prior mode after
refueling and traveling 5 km (3 mi).
3
TRIP 2
F-TRIP