Installation; Mounting The Outboard Motor - Yamaha F2.5 Owner's Manual

Installation

EMU39732
Installation
The information presented in this section is
intended as reference only. It is not possible
to provide complete instructions for every
possible boat and motor combination. Proper
mounting depends in part on experience and
the specific boat and motor combination.
EWM02342
WARNING
 Overpowering a boat could cause se-
vere instability. Do not mount an out-
board motor with more horsepower
than the maximum rating on the capaci-
ty plate of the boat. If the boat does not
have a capacity plate, consult the boat
manufacturer.
 Improper mounting of the outboard mo-
tor could result in hazardous conditions,
such as poor handling, loss of control,
or fire hazards. If you are not able to
mount the outboard motor properly,
consult a Yamaha dealer.
EMU42942

Mounting the outboard motor

EWM02301
WARNING
Do not hold the top cowling or tiller handle
when mounting or dismounting the out-
board motor. Otherwise, the outboard mo-
tor could fall.
1. Be sure to mount the outboard motor
while the boat is on land. If the boat is on
the water, move it to an area on land.
2. To prevent steering movement, turn the
steering friction adjuster clockwise.
30
1. Steering friction adjuster
3. Turn the tiller handle 180° so that it is
pointing rearward.
4. Hold the carrying handle and the hand-
grip on the front side of the bottom cowl-
ing and lift up the outboard motor.
1
1. Carrying handle
2. Handgrip
1
ZMU08361
ZMU08362
2
ZMU08363